TDA7498E vs. TPA3116D2 : Which one is better?

 

TDA7498E Description

The TDA7498E  is a dual BTL class-D audio amplifier with a single power supply designed for home systems and active speaker applications. It comes in a 36-pin PowerSSO package with exposed pad up (EPU) to facilitate mounting a separate heatsink.


TPA3116D2 Description

The TPA3116D2 is a stereo efficient, digital amplifier power stage for driving speakers up to 100W / 2Ω in mono. The high efficiency of the TPA3130D2  allows it to do 2 × 15 W without an external heat sink on a single layer PCB. The TPA3118D2  can even run 2 × 30 W / 8Ω without a heat sink on a dual-layer PCB,  If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ωwith a small heatsink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB  to be used across different power levels.

The TPA3116D2 advanced oscillator/PLL circuit employs multiple switching frequency options to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices.

The TPA3116D2 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, Undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

More details: https://www.utmel.com/components/tda7498e-vs-tpa3116d2-which-one-is-better?id=1429

Comments

Post a Comment

Popular posts from this blog

OV7670 vs OV2640 Which one is better?

  OV7670 Description The  OV7670  CAMERACHIP TM  is a low voltage  CMOS  image sensor that provides the full functionality of a single-chip VGA camera and image processor in a small footprint package. The  OV7670  provides full-frame, sub-sampled, or windowed 8-bit images in a wide range of formats, controlled through the  Serial Camera Control Bus    (SCCB) interface. This product has an image array capable of operating at up to 30 frames per second (fps) in  VGA  with complete user control over image quality, formatting, and output data transfer. All required  image processing functions , including exposure control, gamma, white balance, color saturation, hue control, and more, are also programmable through the  SCCB  interface. In addition,  OmniVision CAMERACHIPs  use proprietary sensor technology to improve image quality by reducing or eliminating common lighting/electrical sources of image contamination, such as fixed pattern noise ( FPN ), smearing, blooming, etc., to produce a
Read more

TIP41C Transistor: Datasheet, Pinout, and Test Circuits

Image
The TIP41C is a base island technology NPN power transistor in the TO-220 plastic package that makes this device suitable for audio, power linear, and switching applications. The  TIP41C  is a base island technology NPN power  transistor  in the TO-220 plastic package that makes this device suitable for audio, power linear, and switching applications. The complementary PNP type is TIP42C. The  TIP41C  can drive a maximum of 6 amperes of load. It will be a perfect substitution if you want to replace a TIP31, TIP31C, or other similar transistors in your circuit to drive more load. TIP41C CAD Model TIP41C   Symbol TIP41C   Footprint TIP41C   3D Model TIP41C Manufacturer STMicroelectronics is a global independent  semiconductor company  and is a leader in developing and delivering semiconductor solutions across the spectrum of microelectronics applications. An unrivaled combination of silicon and system expertise, manufacturing strength, Intellectual Property (IP) portfolio and strategic
Read more

1N4001 vs. 1N4148: Which one is better?

  1N4148 Description The  1N4148   is a standard silicon switching signal diode. It is one of the most popular and long-lived  switching  diodes  because of its dependable  specifications  and low cost. Its name follows the  JEDEC   nomenclature. The  1N4148   is useful in  switching applications  up to about 100 MHz with a reverse-recovery time of no more than 4 ns. 1N4001 Description The  1N4001   is used in  AC adapters  for common household appliances. This  JEDEC   device number series is available in the DO-41 axial package. Diodes with similar ratings are available in SMA and MELF surface-mount packages (in other part number series). More details:  https://www.utmel.com/components/1n4001-vs-1n4148-which-one-is-better?id=1395
Read more